Side Navigation

Technical data

  • standard specification
  • dimentions
online inquiry
  • Home
  • Technical data
  • Standard Specification

Standard Specification

Extruder
Screw diameter & L/D ∮/LD 50/24D 70/24D 90/24D 100/26D
Hydraulic motor for screw movement pump kw 15 22.5 37.5 55
Screw speed range RE(Standard) rpm. 10~85 10~75 10~70 10~62
Barrel heating zones zone 3 3 4 4
Barrel heating capacity kw 7.2 12.2 19 24
Barrel air cooling fan sec 3 3 4 4
Barrel air cooling fan prwer kw 0.4 0.4 0.5 0.5
Plasticizing capacity approx PE 40 75 120 170
PVC kg/h 35 60 80 140
PETG 35 60
Extrusion Diehead
Heating zone Single head zone 3 3 3 3
Double head zone 5 5 5 5
Three head zone 7 7 7
Four head zone 9 9 9
Six head(8 head) zone 17(19)
Heating powe Single head zone 1.2 2.2 3 4
Double head zone 1.8 3.7 3.7 9.5
Three head zone 6 6 12
Four head zone 6 6.9 13.5
Six head(8 head) zone 17.5(22.5)
Center distanc m/m 80~100 100~140 140~170(190) 85~95
Blow Mouding Unit
Hollow body maximum capacity cc 600 2500 5000(10,000) 5000
Max. Clamping force kn 32 90 95(125) 105
Operating hydraulic Pressure Movement bar 50~60 50~60 50~60 50~60
Extruder 100~150 100~150 100~170 100~170
Blowpin pressure bar 0~50 0~50 0~70 0~70
Dry cycle ① sec 1.7 2.3 2.5 2.5
Hydraulic motor power kw 7.5 15 15 22
Capacity of oil tank ℓ 350 400 500 280
Approximate Utilite
Blowing air pressure bar 6~8 6~8 6~8 6~8
Blowing air consumption ② l/min 1000 1500 2000 2000
Cooling water pressure bar 2~3 2~3 2~3 2~3
Cooling consumption for oil tank(30) kcal/ h 5000 7000 7000 8500
Cooling consumption for mould & feed sone(7~8) kcal/ h 7000 7500 7500 7500
Total connected load kw 30.1 53.8 77.8 123(123)
Average energy consumpting kw 22.8 42 58 87
Machine approximate weight kg 5000 7000 8000 9500